All You Need To Know About Kylo Ren's Lightsaber
Kylo Ren carried a crossguard lightsaber as master of the Knights of Ren, as well as when he became Supreme Leader of the First Order. While lightsabers come in a variety of hues, they all have the same basic qualities. Kylo Ren’s lightsaber is distinct in that it features an additional beam crossguard. Unlike normal lightsabers, his lightsaber produces an unusually “ragged” blade, energized by a defective kyber crystal. The quillons/crossguard blades function as release valves, also serving to protect Ren’s hands in battle.
All lightsabers typically emit a steady beam, but Kylo Ren’s lightsaber pulsates, reflecting its instability. While those extra beams can help in combat, they also pose a high risk for the wielder, as they're hard to control. However, Kylo Ren did not consider his lightsaber blade’s instability to be a flaw; in contrast, he seems to have prized it for this trait. At the time of his affiliation with the dark side of the Force, his lightsaber was his continual companion. He only set it aside after reclaiming his identity as Ben Solo and seeking to restore the Jedi Order.
Featured Collection
The Origin and Construction of Kylo Ren’s Saber
The Ren lightsaber with the crossguard is constructed on a pattern that was invented thousands of years before he was born, with two secondary blades (quillons) emerging from the upper part of the hilt at a 90-degree angle. The lightsaber first appeared in the Great Scourge of Malachor, a pre-Cold War conflict that took place between the Sith Empire and the Jedi Order, resulting in the deaths of all warriors on both sides.
Though inspired by an ancient design, Kylo Ren’s lightsaber had modern components. With the inclusion of quillon emitters, the lightsaber was transformed from a traditional hilt to a crossguard design. The unstable power of the fractured kyber crystal caused the blade to appear jagged and erratic. To manage the excess heat and energy, lateral vents channeled it through the side blades. Without these exhausts, the lightsaber could have burst or been damaged. Following the primary blade, the exhaust beams ignited, releasing surplus energy.
Kylo was unable to bring perfection to the bleeding process due to the crystal’s damaged state. As a result, the weapon’s instability became a permanent feature. Throughout his life, Kylo Ren's crossguard lightsaber symbolizes his inner doubt and fight to repress the Force’s light side that kept inside him, as well as his raw and untamed Force might.
Find Kylo Ren's Saber Replica In The Real World
Wield the best lightsaber replica of Kylo Ren if you want to be a part of the Force. Every true Star Wars fan is familiar with the drip around the lightsaber that Kylo Ren wielded. The Original KR XENO NEOPIXEL LIGHTSABER, brought to you by NEO Sabers, is one of the coolest and finest, most swinging lightsabers on the market. It's a must-have for your lightsaber collection; from its build to its technical characteristics, everything is thrilling and authentic. Not just this one, we have more items inspired by Kylo Ren’s unique weapon. Explore our collection and get yours with the customizable options to win over your opponents.
Get Your Original KR Lightsaber
Features of Kylo Ren's Lightsaber Replica
Kylo Ren’s crossguard lightsaber replica is all you need to satisfy the Star Wars fan in you, with excellent characteristics that make it seem just as spectacular as the original lightsaber.
- * Realistic light and sound effects
- * 50-watt RGB Neopixel strip with unlimited colors
- * Loud volume-adjustable speaker
- * Long, shatterproof, detachable polycarbonate blade
- * Ideal for heavy dueling
- * Advanced features like the flash-on-clash feature, ignition modes, tip drag, stab, melt, blaster, lockup, and deflection
- * Motion sensors that produce sound effects when swinging
- * Bluetooth and SD card
- * Nine customizable sound themes with various sound effects
- * Removable lithium-ion battery for a full day of lightsaber dueling
Kylo Ren's Lightsaber Combat Style
Which of the seven lightsaber forms did Kylo Ren use? Although the evidence isn’t conclusive, some of the known forms he utilized in his life are mentioned below.
- * Form V: Djem So
He was most likely a follower of Form V, Djem So. Kylo, like Luke and Anakin, used Form V extensively. He concentrated on leveraging his strength to overwhelm his opponents with strong overhead punches. It was a very aggressive form that relied on the user’s strength to break through opponents’ defenses while also redirecting opponents’ assaults into stronger and more devastating offenses. The form required a high level of speed and power to perform a barrage of assaults and counterattacks. Another of the Form V master’s characteristics is his dexterous ability to parry blaster fire. - * Form IV: Ataru
Kylo occasionally performed graceful tricks similar to those of Ataru. He used acrobatics to improve his fighting position and circular movements to strike from unanticipated angles. The constant utilization of physical blows in fighting is another characteristic of Ataru that Kylo Ren adopts in his combat technique. - * Form VI: Niman
Kylo’s most significant style was Form VI Niman, in which he exhibited considerable competence. Ren did use strategies that were more frequently associated with other styles on occasion. For example, he used the Niman practitioner’s trick of using the Force to push or drag opponents into places where they could be struck more readily.
Get Your Own Custom Lightsaber
If you are a true Star Wars fan who wants to forge your destiny in the galaxy far, far away, grab the original replica of Kylo Ren’s lightsaber and rule the world. However, if you want a custom saber to reflect your distinctive personality, NEO Sabers also gives you the freedom to customize your saber with multiple personalization options.
Craft your own one-of-a-kind saber by selecting your favorite hilt design, sound effects, and color-changing capabilities. Pay tribute to famous figures like Kylo Ren with the saber that suits your style. Whether you want a faithful replica or a custom hybrid, we have you covered!
Our saber galaxy enables you to enjoy the ultimate experience, so fuel your inner Force and begin your Star Wars journey now!
FAQ
Why does Kylo Ren's lightsaber have three blades?
Kylo Ren's lightsaber has three blades: a primary blade and two smaller crossguard blades, also known as quillons, because the cracked kyber crystal generates excess energy that must be released to keep the lightsaber from exploding. Kylo added quillons to the hilt instead of throwing away the crystal.
Why did Kylo Ren kill Han Solo?
Kylo Ren killed his father, Han Solo, to show Supreme Leader Snoke that he was strong with the Dark Side. However, it turned out to be a tragic mistake. Rather than ending the story on a powerful note, it was deeply regretful for him.
Where did Kylo Ren get his name?
Kylo Ren chose his name after turning to the Dark Side. He got it because he wanted to join and be a member of the Knights of Ren. As Kylo took on the name, he completely severed himself from his previous identity as Ben Solo and instead enjoyed the new identity.
Why is Kylo Ren's kyber crystal cracked?
Kylo Ren’s kyber crystal is cracked because he improperly performed the dark side “bleeding” ritual, causing it to fracture. This results in his lightsaber’s unstable, crackling blade. The broken crystal reflects his inner conflict and emotional turmoil between the light and dark sides of the Force.
Why does Kylo Ren die?
Kylo Ren dies because he transfers all of his life force to revive Rey after she dies battling Emperor Palpatine. This selfless act of redemption costs him his life, but completes his redemption and returns him to the light side.
Why did Kylo Ren need a crossguard?
Kylo Ren's lightsaber had two small crossguard blades, which he called quillons. It protected his hands during the battle procedure, giving an element of practicality to the weapon. It also gave an aggressive look as compared to other lightsabers in the universe because the crossguard design was inspired by medieval sword designs.